|
Actually 379 cubic inches, but most people still call it a 377 which is why I put that in the title. I took it in on trade and will be sold as is. The machine work was not done in my shop. We tore it down, cleaned the parts, clean up honed the block and reassembled it with new rings. The bearings looked good so they were used again. It is a .040 over 400 block, 509 2-bolt casting (which is the best of the 3 castings). The block has been decked. It has a 3.480 stroke cast 350 crank with bearing spacers. The rods are stock 5.700 rods with aftermarket rod bolts and the pistons are cast hypereutectic flat top two valve relief. Like I said, the machine work was not done here so I guarantee nothing. But this would make a great street/strip or circle track engine. The price is $1200 and it must go this week.
_________________
If you build what everyone else builds, you are only as fast as they are.
http://www.loughengines.com
|
Login
Register
Gallery
Arcade
FAQ
